Low rise wheelchair access lift

 Glaze low rise wheelchair platform lift  

GLAZE - Model  P04H 

This GLAZE low rise platform lift is suitable for indoor and outdoor applications. It is an ideal solution where ramps are not possible. The safe and robust design complies with the requirements of the BCA and the latest Australian Safety and Quality Standards. 

Max Carrying Capacity: 
300kg

Platform Size:  
W 1120 x D 1500mm

Travel: 
Maximum travel 2000mm (This dimension is critical to +/- 10mm).    

Min Shaft Dimensions:  
W 1180 x D 1550mm  Refer to Special Note

SPECIAL NOTE: To comply with AS1735 - if lift is abutting a wall or barrier, a 75mm clear gap must be maintained between platform and any walls or obstructions.

Pit Depth:  
215 if travel <1500 mm, 
255 if travel >1500 mm

Power Supply:  
220 V, 20amp, single phase

Controls Tension:  
24 VCC

Speed:  
2m/min

Gates & Railings Height:  
1100mm

Clear Gate Width:  
902mm

Control:  
Constant Pressure Control

Machine Room Location:  
On board.

Fixings: 
The structure is fixed to the building at the pit floor and landing entrance.

*  The structure proposed is of standard design. It is suitable to support the lift only and cannot be used as a structural member for the surrounding building.

Note: Easy Living Home Elevators Pty Limited reserves the right to make changes to the above specifications and information at any time, without notice.